BF-W100 Signal Jammer

Equipment introduction
The machine is a Single channel 10W shield, 10 channel output, each rated 10W output power, high efficiency management chip, customized high-gain omnidirectional antenna coverage, can interfere with signals in the range of 1-40 meters (depending on the strength of the base station signal), For the operator's dual-mode 2G/3G/4G/5G and 2.4/5.8G GPS WIFI signal shielding, so that all communication within the shielding range and the outside world completely interrupted, the communication network is reflected as no network or no signal, no service. Now the development of science and technology has caused social harm to mobile information leaks, telephone detonations, serious areas and so on; Due to the continuous strengthening of the current signal coverage, the shielding effect of the shield is poor, and the machine has proved that the shielding effect reaches the best distance through many experiments; We use imported chips to improve efficiency and high-gain antennas to enhance coverage. Scope of use: all kinds of examination rooms, government, military, conference rooms, classrooms, prisons, cinemas, courts, libraries, public security or command center security areas and other occasions.

Product profile
Product name: Signal blocker
Product model: BAIFANG W100
Equipment size: 32cm·24cm·6cm
Packing size: 52cm·17.5cm·12.5cm
Weight: 4.3KG
Working range：2G/3G/4G/5G/2.4/5.2/5.8GWIFI/GPS
Effect: Radius 1-40 meters (depending on the strength of the signal used)

Product real picture

Product configuration list

Product installation operation process
1、Equipment installation
（1）Inspection equipment
Check the appearance of the device and the availability of related accessories.
（2）Equipment installation
1、Before use: Tighten the corresponding 10 antennas on the host, connect all antennas, ensure that the antennas are tight, and then switch on the 220V power supply, the power indicator (green) is on, and the device starts to work.
2、For temporary use, the host can be placed on the table, if fixed installation, can be installed on the security table. The installation position is 150-200 cm from the ground.
3、A bracket can be used to fix the device to a wall or other object, but it cannot block or cover the heat dissipation of the fan.
（3）Equipment utilization
Turn on the power and turn on the power switch manually. After 10 seconds, the device starts to work. Turn off the power switch manually and the device stops working.

Machine parameters and function operation description
1、Product function list

Product parameters table

Analysis of common problems
The shielding distance is short or ineffective：
(1) Check whether the antenna is fully connected and ensure that the antenna is connected correctly; Check whether the power plug is connected to the host; Check whether the main power switch is on.

(2) Check the abnormal sound of the equipment, pick up the equipment and shake it around to hear the same sound; If an obvious abnormal sound is heard, it is preliminarily determined that some devices inside the device are falling off.
(3)The signal shielding effect is related to the strength of the signal used, so the same equipment effect is different in different places. If the device is relatively close to the operator's transmitting base station tower, and the signal field strength is -60dBM, the shielding effect of the device is close. We can consider more power.

Matters need attention
1．Please pay attention to waterproof electronic products.
2．The power supply is DC12-24V. The recommended operating voltage is DC24V. The installation should first determine whether the user's power system is within this range, exceeding the maximum voltage of the device will cause damage to the device.
3．When the ambient temperature exceeds the operating temperature range, power off the device. If you need to work for a long time, you can have multiple devices, take turns, or install a timer to set the switching time.
4．When encountering abnormal conditions, please do not repair yourself. The manufacturer is not liable for damage caused by the built-in high voltage original accessories or by unplugging the connections between the components.

After-sales service
1．This product from the date of installation, enjoy one year warranty service. During the warranty period, equipment damage caused by non-human factors or product quality, please contact the distributor in time to deal with the freight.
2．The damage caused by the customer's private dismantling or force majeure (such as fire, flood, etc.) will not be repaired.
3．After the expiration of the warranty, due to the use of the product damage, failure, maintenance needs to be charged material costs.
4．Free of charge to provide customers with product purchase, use, installation and other consulting and technical services.
5．The Company reserves the right of final interpretation.